ATP Tennis Match Simulator
Explore ATP 500, Masters 1000 and Grand Slam men's main-draw match scenarios with surface-aware hold estimates and game-by-game playback.
Match Simulator is live for PRO members
Included with the PRO plan (not Premium, no free trial) for NBA, NHL, NFL, soccer and ATP tennis. Statistical estimates from the numbers shown — not live match data, predictions or guarantees.
Anyone can explore the page and matchups. Running 10,000 simulations requires an active PRO membership.
Pick a game
Upcoming matches from ESPN. Picking a match pre-fills serve-hold estimates from each player's serve and return ratings on this surface, measured on two seasons of real ATP results, adjusted for recent match load. Players without ATP results fall back to the surface baseline and live ranking points; official serve/return stats can be entered below.
ATP 500 · Masters 1000 · Grand Slams — men's main-draw singles only.
Loading schedule…
Simulations may be more accurate once official lineups are released and incorporated. Accuracy is not guaranteed; saved history preserves the original data.
Simulated scenario
Tennis · Awaiting simulation
Game flow
Scoring momentum built only from this simulated scenario's scoring events — not possession, shots or live data. Tap or drag the chart to jump.
Simulated event feed
- Events appear as playback runs.
Score by set
| S1 | S2 | S3 | T | |
|---|---|---|---|---|
| Player A | — | — | — | — |
| Player B | — | — | — | — |
One actual sampled match from the 10,000 runs, not the most likely outcome. Game winners, service holds, breaks and set scores come from that same sample. Each game uses the entered hold rates; the first server is sampled and service alternates continuously across sets. Tie-breaks are played point by point from the serve point-win chance implied by each hold rate, with the real serving order (simulations saved before this change keep the older approximation). Tie-breaks reach 7 points (10 in the fifth set of a best-of-five), with a two-point margin. The court shows one schematic serve per game, not actual rallies, player positions or live tracking. Playback duration is illustrative, not estimated match time. Surface and recent match load enter through the hold rates; injuries are not modeled.
Surface form, serve against return and recent load
The tennis selector accepts only verified ATP 500, Masters 1000 and Grand Slam main draws. Hold estimates combine each player's serve and return ratings on the match surface, recovered from two seasons of real ATP set scores, with a measured recent-load adjustment; tie-breaks are played point by point. They are editable model estimates, not official statistics; players without ATP results fall back to surface baselines and ranking points. Official serve and return game rates for both players enable Barnett–Clarke adjustment. The court replays actual sampled games; ball paths are schematic rather than point-level data.
Sports simulation: probabilities, not promises
A match simulator explores possible outcomes under a statistical model. Saint Picks runs 10,000 Monte Carlo samples for NBA, NHL, NFL, soccer and eligible ATP tennis matches. The estimates describe the model and its inputs—not what a real match must do.
What 10,000 Monte Carlo simulations mean
Each run samples a possible score or tennis match. Win probabilities count how often each side wins across those samples. A 70% estimate means about 7,000 model wins out of 10,000 runs; it is not a measured 70% chance for the real match. More samples reduce sampling noise, not errors in the assumptions or input data.
ATP tennis head-to-head simulation
Tennis is limited to ATP 500, Masters 1000 and Grand Slam men’s main-draw singles. Serve-hold inputs come from each player's serve and return ratings on the match surface, recovered from two seasons of real ATP set scores, combined for this opponent and adjusted for measured recent match load (see How our tennis model works). They are model estimates, not official serve statistics; players without ATP results fall back to a surface baseline and ranking points. Entering both players’ official serve and return game rates enables a Barnett–Clarke matchup adjustment. Matches are then sampled game by game.
Data sources and model limits
Schedules and available season statistics come from ESPN. Matchup drawers distinguish event starters, projected depth-chart lineups and roster-only coverage, and label seasons and refresh times. Player stats and injury information are context: they do not automatically change simulation inputs. Missing data stays unavailable. Weather, fatigue and other news are not independently modeled.
One replay is not the probability distribution
The radar shows one sampled scenario, not every possible outcome. Its scoring events agree with that scenario, but paths and timing are schematic—not live tracking. The same matchup and identical inputs reproduce the same result under the current model. Changing inputs can change the estimate; local history preserves inputs for replay on this browser.
How our tennis model works
Every tennis simulation follows the same steps. All numbers come from real finished ATP matches over the current and previous season (ESPN results, every ATP tournament including qualifying). When a player isn't in our records, the simulator says so and falls back to the ranking-based estimate, which you can see and edit.
1. Holds recovered from set scores
Every service game is a hold or a break, but results only show set scores. For each match the model weighs every order of games that fits the score, for both possible first servers, to estimate how many games each player held. Doing this over thousands of matches recovers hold rates; a check on later matches found the predicted number of tie-breaks matched what really happened.
2. Serve and return, by surface
Each player gets a serve rating and a return rating, plus a separate adjustment for hard, clay and grass. Surface adjustments are pulled toward the player's overall level more strongly, so a few clay matches can't swing the numbers; with enough matches, a player who holds far more on grass than on clay shows it. Recent matches count more (a match eight months old counts half).
3. Style matchup
A hold rate always combines the server's serve rating with the returner's return rating on that surface. A big server keeps a high hold against weak returners but loses more of it against an elite returner, and two big servers produce more 6-6 sets. The panel shows each player's hold against this opponent next to his hold against an average returner, and the chance of tie-breaks.
4. Recent match load
We don't have match durations, so load is measured as games played in the player's matches 6–36 hours and 36–72 hours earlier. Its effect on holds is measured on our records and has turned out small: the ratings already reflect form, and a long match the day before changes the hold by about a point. The panel shows the measured value instead of an assumed one.
5. Tie-breaks point by point
Hold rates are converted to the chance of winning each point on serve, and tie-breaks are played point by point with the real serving order (a Slam's deciding set uses a 10-point tie-break). Head-to-head records are shown for context but not applied: a few meetings are too few to measure.
6. From hold rates to 10,000 simulations
The simulator plays 10,000 matches game by game from both hold rates and reports each player's win chance, expected sets, the most likely set scores and how often tie-breaks happen. You can edit the hold rates under Custom inputs, or enter official serve and return statistics.
7. What the model doesn't include
Injuries, match duration and heat, indoor versus outdoor courts, ball and altitude differences, motivation and live momentum aren't in the numbers. Results are estimates, never guarantees. 18+. Bet responsibly.
Match simulator questions
- Is the Saint Picks Match Simulator available to everyone?
- Anyone can view the page, schedules and matchup information. Running simulations is included with the Saint Picks PRO plan. Premium and the Premium free trial do not include it, PRO has no free trial, and there is no free simulation tier.
- Does the simulator predict the exact final score?
- No. An expected score is a model average, while the animation is one sampled result. Neither is a guaranteed final score or a validated match forecast.
- Do projected lineups and player stats affect the result?
- Team scores still use the displayed team inputs. The player projections tab uses available current-team season statistics and adjusts rates by expected team scoring relative to its baseline. Out and uncertain players are excluded; other projections are conditional on participation. Independent player estimates do not add up to the radar score. Missing data remains unavailable.
- Why does repeating a simulation return the same result?
- A deterministic seed uses the sport, matchup identity and inputs. Under the current model, identical values reproduce the same samples rather than creating a different answer on each click. History is stored locally in this browser, not synced across accounts or devices.
- Can a simulation guarantee a winning bet?
- No. Model uncertainty, missing information and real-match variation remain. These estimates are informational only, for adults aged 18 and over. Bet responsibly.
Assumptions & method
- NFL expected points come from opponent-adjusted red-zone trips, touchdown conversion and other scoring, with home field, quarterback, wind and score spreads measured on real results (see How our NFL model works); regulation ties go to a simplified overtime field goal, and the playback splits the score into touchdowns and field goals as an illustration.
- Each simulation samples goals/points from statistical distributions (Poisson for soccer & NHL, normal for NBA, game-by-game for tennis) driven only by the numbers you enter.
- Soccer rates attack and defence from real results adjusted for opponent strength, with a home edge measured from the same results (none at neutral venues); see How our soccer model works.
- NBA games picked from the schedule use our NBA model: home court, back-to-back effect, team splits, listed absences and margin/total spreads are measured from real results (see How our NBA model works).
- NHL games picked from the schedule use our NHL model: even-strength ratings, power play vs penalty kill, goalies, home ice, back-to-backs, travel and the home share of OT/shootout wins are measured from official NHL results (see How our NHL model works). NHL runs with plain season averages use a fixed 12% home goals edge and an assumed 53% home OT/shootout chance.
- NBA runs with plain season averages (custom inputs or when the model lacks data) use a fixed 2.5-point home edge and 12/16-point margin/total standard deviations; extreme inputs may be unreliable.
- No injuries, lineups, weather or news are included unless you account for them in the numbers yourself.
More free betting tools
Simulations are statistical estimates, not predictions or guarantees. Variance is real: a 70% favorite still loses roughly 3 times in 10. For information only. 18+. Bet responsibly.